📡 Hardware Model Setup Sheet
Amazon Eero Eero (1st Gen)
Complete default configuration parameters, factory credentials, LED indicator cheat-sheet, and hardware reset procedure.
Quick Gateway Answer (RFC 1918 Verified)
Default IP: 192.168.4.1 • Web: N/A (Eero App) • User: Managed via Amazon eero App • Pass: Managed via Amazon eero App
To log into the Amazon Eero Eero (1st Gen), connect to your router via Wi-Fi or Ethernet and open http://192.168.4.1 in your browser.
Hardware Configuration & Specifications
Manufacturer
Amazon Eero
Hardware Type
Original TrueMesh Router
Default Gateway IP
192.168.4.1
Alternative Web Domain
N/A (Eero App)
Fallback IP
192.168.7.1
Default Username
Managed via Amazon eero App
Default Password
Managed via Amazon eero App
Password on Sticker
Yes (Check Base Label)
Default SSID Pattern
eero-setup
Wi-Fi Standard
Wi-Fi 5 (AC1200)
How to Factory Reset Amazon Eero Eero (1st Gen)
Hardware Reset Instructions:
Locate the reset button on the back/base. Hold down for 15 seconds until the LED light flashes red. Release immediately to reset the unit back to factory defaults. (Holding for 7 seconds resets network only without clearing registration).
LED Indicator Diagnostic Cheat-Sheet
| LED Name | Normal State | Error / Alert State | Description & Function |
|---|---|---|---|
| Front Status LED | Solid White (Connected to Internet) | Solid Red (No Internet connection) / Blinking Blue (Bluetooth pairing) / Blinking Red (Resetting) | Single status indicator LED. |
⚡ Live Gateway Reachability Probe
Target: 192.168.4.1Test whether your device is currently connected to this gateway subnet via local browser ping probes: