📡 Hardware Model Setup Sheet
Arris Arris BGW210-700
Complete default configuration parameters, factory credentials, LED indicator cheat-sheet, and hardware reset procedure.
Quick Gateway Answer (RFC 1918 Verified)
Default IP: 192.168.1.254 • Web: http://192.168.1.254 • User: admin • Pass: Sticker Access Code
To log into the Arris Arris BGW210-700, connect to your router via Wi-Fi or Ethernet and open http://192.168.1.254 in your browser.
Hardware Configuration & Specifications
Manufacturer
Arris
Hardware Type
Broadband Fiber ONT Gateway
Default Gateway IP
192.168.1.254
Alternative Web Domain
http://192.168.1.254
Fallback IP
192.168.1.1
Default Username
admin
Default Password
Sticker Access Code
Password on Sticker
Yes (Check Base Label)
Default SSID Pattern
ATT-WIFI-XXXX
Wi-Fi Standard
Wi-Fi 5 (AC2100 4x4 MU-MIMO)
How to Factory Reset Arris Arris BGW210-700
Hardware Reset Instructions:
Press and hold the recessed Reset button on the rear for 15 seconds using a paperclip until all front LEDs blink simultaneously. Wait 3 minutes for DOCSIS upstream locking.
LED Indicator Diagnostic Cheat-Sheet
| LED Name | Normal State | Error / Alert State | Description & Function |
|---|---|---|---|
| Power | Solid Green | Off | Device power. |
| Downstream | Solid Blue (DOCSIS 3.1) / Solid Green (DOCSIS 3.0) | Blinking (Scanning for carrier) | Incoming cable signal. |
| Upstream | Solid Blue (OFDMA bonded) / Solid Green | Blinking (Upstream ranging) | Return channel link. |
| Online | Solid Green | Blinking (Obtaining DHCP/TFTP configuration) | ISP provisioning. |
⚡ Live Gateway Reachability Probe
Target: 192.168.1.254Test whether your device is currently connected to this gateway subnet via local browser ping probes: