📡 Hardware Model Setup Sheet
Cisco Cisco Meraki Go GX20
Complete default configuration parameters, factory credentials, LED indicator cheat-sheet, and hardware reset procedure.
Quick Gateway Answer (RFC 1918 Verified)
Default IP: 192.168.128.1 • Web: https://meraki-go.com • User: admin (Meraki Account) • Pass: admin
To log into the Cisco Cisco Meraki Go GX20, connect to your router via Wi-Fi or Ethernet and open http://192.168.128.1 in your browser.
Hardware Configuration & Specifications
Manufacturer
Cisco
Hardware Type
Cloud Managed Security Gateway
Default Gateway IP
192.168.128.1
Alternative Web Domain
https://meraki-go.com
Fallback IP
192.168.1.1
Default Username
admin (Meraki Account)
Default Password
admin
Password on Sticker
No (Standard Preset)
Default SSID Pattern
N/A (Managed via Meraki Go App)
Wi-Fi Standard
Cloud Managed Router Firewall
How to Factory Reset Cisco Cisco Meraki Go GX20
Hardware Reset Instructions:
Press and hold the Reset button with a paperclip for 10 seconds until the DIAG LED flashes. The unit will wipe all NVRAM startup configurations and restore factory defaults.
LED Indicator Diagnostic Cheat-Sheet
| LED Name | Normal State | Error / Alert State | Description & Function |
|---|---|---|---|
| Power / System | Solid Green | Solid Amber (Self-test fail) / Flashing Amber (Booting) | Hardware system status. |
| WAN | Solid Green (1G link) | Amber (10/100 link) / Off | Uplink interface. |
| VPN | Solid Green (Tunnel active) | Off (No tunnels established) | Hardware IPsec/SSL VPN state. |
⚡ Live Gateway Reachability Probe
Target: 192.168.128.1Test whether your device is currently connected to this gateway subnet via local browser ping probes: