📡 Hardware Model Setup Sheet
D-Link DIR-615
Complete default configuration parameters, factory credentials, LED indicator cheat-sheet, and hardware reset procedure.
Quick Gateway Answer (RFC 1918 Verified)
Default IP: 192.168.0.1 • Web: http://192.168.0.1 • User: Admin • Pass: [empty]
To log into the D-Link DIR-615, connect to your router via Wi-Fi or Ethernet and open http://192.168.0.1 in your browser.
Hardware Configuration & Specifications
Manufacturer
D-Link
Hardware Type
Classic Wireless-N Router
Default Gateway IP
192.168.0.1
Alternative Web Domain
http://192.168.0.1
Fallback IP
192.168.1.1
Default Username
Admin
Default Password
[empty]
Password on Sticker
No (Standard Preset)
Default SSID Pattern
dlink
Wi-Fi Standard
802.11n (300Mbps)
How to Factory Reset D-Link DIR-615
Hardware Reset Instructions:
With the router powered ON, use an unfolded paperclip to press and hold the recessed Reset button on the bottom or rear for 10 seconds until the Power light turns orange/amber. Release and wait 1 minute.
LED Indicator Diagnostic Cheat-Sheet
| LED Name | Normal State | Error / Alert State | Description & Function |
|---|---|---|---|
| Power | Solid White/Green | Solid Orange (Booting/POST failed) / Blinking Orange | Hardware power. |
| Internet | Solid White/Green | Solid Orange (No Internet access) / Off | WAN broadband connection. |
| 2.4 GHz / 5 GHz | Solid White/Green | Off | Wireless broadcast state. |
⚡ Live Gateway Reachability Probe
Target: 192.168.0.1Test whether your device is currently connected to this gateway subnet via local browser ping probes: