📡 Hardware Model Setup Sheet
D-Link DWR-960
Complete default configuration parameters, factory credentials, LED indicator cheat-sheet, and hardware reset procedure.
Quick Gateway Answer (RFC 1918 Verified)
Default IP: 192.168.0.1 • Web: http://192.168.0.1 • User: admin • Pass: admin
To log into the D-Link DWR-960, connect to your router via Wi-Fi or Ethernet and open http://192.168.0.1 in your browser.
Hardware Configuration & Specifications
Manufacturer
D-Link
Hardware Type
LTE Cat7 Wi-Fi AC1200 Router
Default Gateway IP
192.168.0.1
Alternative Web Domain
http://192.168.0.1
Fallback IP
192.168.1.1
Default Username
admin
Default Password
admin
Password on Sticker
Yes (Check Base Label)
Default SSID Pattern
dlink-XXXX
Wi-Fi Standard
Wi-Fi 5 + LTE Cat 7
How to Factory Reset D-Link DWR-960
Hardware Reset Instructions:
With the router powered ON, use an unfolded paperclip to press and hold the recessed Reset button on the bottom or rear for 10 seconds until the Power light turns orange/amber. Release and wait 1 minute.
LED Indicator Diagnostic Cheat-Sheet
| LED Name | Normal State | Error / Alert State | Description & Function |
|---|---|---|---|
| Power | Solid White/Green | Solid Orange (Booting/POST failed) / Blinking Orange | Hardware power. |
| Internet | Solid White/Green | Solid Orange (No Internet access) / Off | WAN broadband connection. |
| 2.4 GHz / 5 GHz | Solid White/Green | Off | Wireless broadcast state. |
⚡ Live Gateway Reachability Probe
Target: 192.168.0.1Test whether your device is currently connected to this gateway subnet via local browser ping probes: