📡 Hardware Model Setup Sheet
D-Link EXO AX5400 (DIR-X5460)
Complete default configuration parameters, factory credentials, LED indicator cheat-sheet, and hardware reset procedure.
Quick Gateway Answer (RFC 1918 Verified)
Default IP: 192.168.0.1 • Web: http://dlinkrouter.local • User: Admin • Pass: password (or printed on configuration card)
To log into the D-Link EXO AX5400 (DIR-X5460), connect to your router via Wi-Fi or Ethernet and open http://192.168.0.1 in your browser.
Hardware Configuration & Specifications
Manufacturer
D-Link
Hardware Type
Wi-Fi 6 Gigabit Router
Default Gateway IP
192.168.0.1
Alternative Web Domain
http://dlinkrouter.local
Fallback IP
192.168.1.1
Default Username
Admin
Default Password
password (or printed on configuration card)
Password on Sticker
Yes (Check Base Label)
Default SSID Pattern
dlink-XXXX
Wi-Fi Standard
Wi-Fi 6 (AX5400 6-Stream)
How to Factory Reset D-Link EXO AX5400 (DIR-X5460)
Hardware Reset Instructions:
With the unit powered on, insert a paperclip into the Reset hole on the rear panel. Hold for 10 seconds until the power LED flashes orange.
LED Indicator Diagnostic Cheat-Sheet
| LED Name | Normal State | Error / Alert State | Description & Function |
|---|---|---|---|
| Power | Solid White | Solid Orange (Booting) / Blinking Orange (Resetting) | System power status. |
| Internet | Solid White | Solid Orange (Physical cable connected, no IP) / Off | WAN broadband link. |
⚡ Live Gateway Reachability Probe
Target: 192.168.0.1Test whether your device is currently connected to this gateway subnet via local browser ping probes: