📡 Hardware Model Setup Sheet
DrayTek Vigor 2862 Series
Complete default configuration parameters, factory credentials, LED indicator cheat-sheet, and hardware reset procedure.
Quick Gateway Answer (RFC 1918 Verified)
Default IP: 192.168.1.1 • Web: http://192.168.1.1 • User: admin • Pass: admin
To log into the DrayTek Vigor 2862 Series, connect to your router via Wi-Fi or Ethernet and open http://192.168.1.1 in your browser.
Hardware Configuration & Specifications
Manufacturer
DrayTek
Hardware Type
Classic VDSL2 Security Router
Default Gateway IP
192.168.1.1
Alternative Web Domain
http://192.168.1.1
Fallback IP
192.168.0.1
Default Username
admin
Default Password
admin
Password on Sticker
No (Standard Preset)
Default SSID Pattern
DrayTek-XXXX
Wi-Fi Standard
VDSL2/ADSL2+ Enterprise Router
How to Factory Reset DrayTek Vigor 2862 Series
Hardware Reset Instructions:
While router is running, press and hold the Factory Reset pinhole on the front panel for 10 seconds until the ACT LED starts blinking rapidly. Release and wait 1 minute.
LED Indicator Diagnostic Cheat-Sheet
| LED Name | Normal State | Error / Alert State | Description & Function |
|---|---|---|---|
| ACT | Blinking Green (1 sec cadence normal) | Solid or Off (Firmware hung/system error) | DrayOS activity. |
| WAN 1 / WAN 2 | Solid Green | Blinking (Negotiating) / Off | Physical broadband uplink. |
| VPN | Solid Green (Active tunnel) | Off | IPsec/SSL VPN status. |
⚡ Live Gateway Reachability Probe
Target: 192.168.1.1Test whether your device is currently connected to this gateway subnet via local browser ping probes: