📡 Hardware Model Setup Sheet
MikroTik hEX S (RB760iGS)
Complete default configuration parameters, factory credentials, LED indicator cheat-sheet, and hardware reset procedure.
Quick Gateway Answer (RFC 1918 Verified)
Default IP: 192.168.88.1 • Web: http://router.lan • User: admin • Pass: [empty]
To log into the MikroTik hEX S (RB760iGS), connect to your router via Wi-Fi or Ethernet and open http://192.168.88.1 in your browser.
Hardware Configuration & Specifications
Manufacturer
MikroTik
Hardware Type
Gigabit Router with SFP
Default Gateway IP
192.168.88.1
Alternative Web Domain
http://router.lan
Fallback IP
192.168.1.1
Default Username
admin
Default Password
[empty]
Password on Sticker
No (Standard Preset)
Default SSID Pattern
N/A (Wired)
Wi-Fi Standard
Gigabit RouterOS with SFP
How to Factory Reset MikroTik hEX S (RB760iGS)
Hardware Reset Instructions:
Unplug power. Hold the Reset button down while inserting the power plug. Keep holding for 5 seconds until the ACT LED starts flashing. Release immediately to reset RouterOS configuration to default 192.168.88.1.
LED Indicator Diagnostic Cheat-Sheet
| LED Name | Normal State | Error / Alert State | Description & Function |
|---|---|---|---|
| USR / ACT | Blinking (Kernel boot) / Solid (Ready) | Rapid continuous flashing (Netinstall mode) | RouterOS operating status. |
| Ethernet 1-5 | Solid Green (Link active) | Off (No carrier detected) | Port connection status. |
| SFP+ | Solid Green (Optical link up) | Off | Transceiver status. |
⚡ Live Gateway Reachability Probe
Target: 192.168.88.1Test whether your device is currently connected to this gateway subnet via local browser ping probes: