📡 Hardware Model Setup Sheet
Motorola Motorola MG7550
Complete default configuration parameters, factory credentials, LED indicator cheat-sheet, and hardware reset procedure.
Quick Gateway Answer (RFC 1918 Verified)
Default IP: 192.168.0.1 • Web: http://192.168.0.1 • User: admin • Pass: motorola
To log into the Motorola Motorola MG7550, connect to your router via Wi-Fi or Ethernet and open http://192.168.0.1 in your browser.
Hardware Configuration & Specifications
Manufacturer
Motorola
Hardware Type
DOCSIS 3.0 AC1900 Gateway
Default Gateway IP
192.168.0.1
Alternative Web Domain
http://192.168.0.1
Fallback IP
192.168.100.1
Default Username
admin
Default Password
motorola
Password on Sticker
Yes (Check Base Label)
Default SSID Pattern
Motorola-XXXX
Wi-Fi Standard
Wi-Fi 5 (AC1900 16x4)
How to Factory Reset Motorola Motorola MG7550
Hardware Reset Instructions:
Press and hold the recessed Reset button on the rear for 15 seconds using a paperclip until all front LEDs blink simultaneously. Wait 3 minutes for DOCSIS upstream locking.
LED Indicator Diagnostic Cheat-Sheet
| LED Name | Normal State | Error / Alert State | Description & Function |
|---|---|---|---|
| Power | Solid Green | Off | Device power. |
| Downstream | Solid Blue (DOCSIS 3.1) / Solid Green (DOCSIS 3.0) | Blinking (Scanning for carrier) | Incoming cable signal. |
| Upstream | Solid Blue (OFDMA bonded) / Solid Green | Blinking (Upstream ranging) | Return channel link. |
| Online | Solid Green | Blinking (Obtaining DHCP/TFTP configuration) | ISP provisioning. |
⚡ Live Gateway Reachability Probe
Target: 192.168.0.1Test whether your device is currently connected to this gateway subnet via local browser ping probes: