📡 Hardware Model Setup Sheet
TP-Link Deco X60 (AX5400)
Complete default configuration parameters, factory credentials, LED indicator cheat-sheet, and hardware reset procedure.
Quick Gateway Answer (RFC 1918 Verified)
Default IP: 192.168.68.1 • Web: http://tplinkdeco.net • User: TP-Link ID • Pass: TP-Link ID
To log into the TP-Link Deco X60 (AX5400), connect to your router via Wi-Fi or Ethernet and open http://192.168.68.1 in your browser.
Hardware Configuration & Specifications
Manufacturer
TP-Link
Hardware Type
Mesh Wi-Fi 6 System
Default Gateway IP
192.168.68.1
Alternative Web Domain
http://tplinkdeco.net
Fallback IP
192.168.0.1
Default Username
TP-Link ID
Default Password
TP-Link ID
Password on Sticker
Yes (Check Base Label)
Default SSID Pattern
Deco_XXXX
Wi-Fi Standard
Wi-Fi 6 (AX5400 6-Stream)
How to Factory Reset TP-Link Deco X60 (AX5400)
Hardware Reset Instructions:
With the unit powered ON, use a pin to press and hold the Reset button on the bottom/rear panel for 10 seconds until the System LED blinks rapidly. Release and wait 90 seconds for reboot.
LED Indicator Diagnostic Cheat-Sheet
| LED Name | Normal State | Error / Alert State | Description & Function |
|---|---|---|---|
| Power / Status | Solid Green/White | Blinking Amber (Resetting/Booting) / Off | Device power and initialization. |
| Internet | Solid Green | Solid Amber (No WAN IP) / Off (No physical link) | Ethernet link to Internet modem. |
| 2.4 GHz | Solid Green | Off (Radio disabled) | 2.4 GHz wireless broadcast. |
| 5 GHz | Solid Green | Off (Radio disabled) | 5 GHz wireless broadcast. |
| WPS | Flashing slowly (Negotiating) | Solid Amber (Session timeout) | Wi-Fi Protected Setup. |
⚡ Live Gateway Reachability Probe
Target: 192.168.68.1Test whether your device is currently connected to this gateway subnet via local browser ping probes: