Which routers use 192.168.1.254?

192.168.1.254 is the standard gateway IP used by AT&T for their U-verse and Fiber gateways (including BGW210, BGW320, NVG589, and NVG599) and by British Telecom (BT) for BT Home Hub and Smart Hub devices.

What is the password for AT&T 192.168.1.254?

AT&T does not use a generic password like 'admin'. Instead, you must enter the unique 'Device Access Code' printed on the black-and-white or yellow sticker on the rear of the physical gateway.

Home › Gateways › 192.168.1.254

192.168.1.254 Admin Login: AT&T & BT Hub Guide

Direct Answer: How to Access 192.168.1.254

192.168.1.254 is the default gateway IP address for AT&T Fiber gateways (BGW320, BGW210, NVG589) and British Telecom (BT Smart Hub) devices. To log in: browse to http://192.168.1.254. On AT&T equipment, enter the physical Device Access Code found on the barcode label located on the rear of the device.

Open 192.168.1.254 in Browser

Interactive 192.168.1.254 Gateway Diagnostic Console

Diagnostic Idle

Test whether your computer or smartphone can reach the 192.168.1.254 administration portal over your current Wi-Fi or Ethernet network:

Launch HTTP (Port 80) → Launch HTTPS (Port 443) →

CIDR Subnet: 192.168.1.0/24

Subnet Mask: 255.255.255.0

Usable Hosts: 192.168.1.1 - .253 (253)

Broadcast: 192.168.1.255

Dedicated Brand Guides for 192.168.1.254:

🏢 AT&T Fiber (BGW320) → 🏢 BT Smart Hub → 🏢 2Wire →

How to Authenticate with AT&T Device Access Code

Unlike consumer retail routers, AT&T does not permit a generic password. When making changes to Wi-Fi channel settings, enabling IP Passthrough, or port forwarding on 192.168.1.254, you are prompted for a Device Access Code:

Inspect the rear or bottom sticker of your BGW320 or BGW210 gateway.
Locate the field labeled Device Access Code (or DAC). It is usually a 10-12 character alphanumeric sequence.
Note that this is different from your Wi-Fi password. The Access Code is strictly for administrator system access.